mynest's Blog

In order to maximize energy saving, technologically advanced manufacturers developed their own dedicated power management chips and a dedicated power management procedures to PCGA-BP2NX.

1. IBM's proprietary power management chips and procedures for

IBM in its Pentium Ⅲ CPU-level notebook computer equipped with IBMPowerManagementDevice (short IBMPMDevice) a dedicated power management Sony VGP-BPS2  VGP-BPS9/S chips (need to install a dedicated driver to use). Used in conjunction with the chip power management program is BatteryMixer Latitude D600 Battery, it is included in the IBMConfigurationUtility. Install the program, it will appear in the system tray right side of a battery was placed horizontally, click on the battery there will be many options.

In the BatteryMixer in, IBM offers a number of the original set themes for different applications, users can define their own new theme to fit special needs. BatteryMixer can even detect rechargeable battery capacity, charge and discharge times and automatically determine the status of the battery as Toshiba Satellite P100 battery Toshiba Satellite P105 battery Toshiba Satellite P200 battery, if we find poor state of the battery will be sent to remind users to IBM to repair.As a result of their own design dedicated power management chips, BatteryMixer program even PCI bus power and the speed of CD-ROM can be adjusted, thereby to reduce power consumption.

2. Toshiba Power Management program

Toshiba's power management program is called PowerSaverUtility, this high-handedness of the program after installation, it will completely Sony PCGA-BP2V battery Sony PCGA-BP2T battery replace the Windows built-in power management, when the user tries to access the standard Windows power management program will be a warning should be used Toshiba's own PowerSaverUtility (available from the Windows "Control Panel" in the choice).

Toshiba's PowerSaverUtility to customize the powerful and famous on HP 319411-001, even the battery down to a different degree of options can be different. In addition, users can even define drop to a certain percentage of electricity when the issue of custom voice prompt information or to start a program, this is science into PA3399U-1BRS.

3. SONY Power Management program

PowerPanel power management procedures Sony Zeyi interface, known for beautiful and humane and in line with SONY's JogDial (Turning Point Pass) devices and special SONY NotebookSetupDevice hardware chips.

The use of PowerPanel, users can define their own different themes to suit their needs. Depletion of the battery is full and when, PowerPanel will appear humane tips (also can be customized). But also in the PowerPanel control, Sony laptop screen brightness when the switch to VGP-BPS9A/B Sony VGP-BPS3 319411-001, as unlike other brands - level one jump, but the brightness gradient.

If the notebook computer equipped with a second battery, PowerPanel allows users to set up the first with which a battery, and can be switched at any time. In addition, PowerPanel can also read the information on the battery internal records show that the current rechargeable battery capacity and number of charge cycles via Sony VGP-BPS9 battery.

Laptop battery Lores

In fact, how to make good use of laptop batteries battery, how to extend their use of time and the use of life and so on, is undoubtedly the troubled minds of the majority of notebook users, a problem, the use of laptop batteries There are many methods and techniques, which requires us to usually use more learning and application to Aspire 3000 battery.

(A) rapid access to hibernation

Temporary non-use of laptop computers, in order to conserve battery power, we can set the power management program sony VGP-BPS8 VGP-BPS9, allowing the system to enter sleep mode after a period of time, but this is a shorter or longer will have to wait a few minutes, there is no way to make laptop computer system immediately enter the sleep state?Notebook computer system to enable quick access to dormant state of a simple method is to directly close the display. Press the display would require little effort to VGP-BPS9A/B, you can make notebook computers into sleep mode immediately and effectively conserve battery power. When you need to re-used time, as long as the opening screen, the system will automatically return to pre-operational state.

(B) the screen-saving mode of IBM laptop battery

TFT screen is the largest notebook computer power components, in order to reduce its use of the battery when the power consumption, notebook manufacturers have devised ingenious schemes, but in general are based on the lower screen brightness, and even turn off the screen method through Sony VGP-BPS2  VGP-BPS9/S. In some notebook computer's power management settings you can customize the brightness of the screen, most of notebook computers by a specific shortcut keys adjust screen brightness, generally 6 to 8-level brightness adjustment.

(C) energy-saving settings

Desktop machines using alternating current, most people may not be the computer attached great importance to energy-saving features, but need to use battery-powered notebook computers, the use of energy-saving features should be taken seriously. How to design computer hardware more energy-efficient to Sony VGP-BPS3 319411-001, this is not a user problem to be solved. The user can do is set up on the computer the effective use of energy-saving option.

1. BIOS in the energy-saving settings

In the CMOS settings, most had a "Power Savings", which can choose to "Maximum Battery Life" and "Maximum Performance" and other options. "Maximum Battery Life" is the default power saving mode setting. Notebook computer power saving mode in several states, such as the Idle Mode Idle Mode by Inspiron 1721 Battery Sony VGP-BPL8, Standby Mode standby (wait) mode, Suspend Mode suspension (sleep) mode. Notebook computers, these settings have been able to regulate power consumption, mainly in the computer into energy-saving state, the timely closure of some without the use of the system equipment.

2. Windows in the energy-saving setting

For the average user, in the Windows system to operate a better understanding of energy management can be simpler. Windows Help file, in the "management of hardware and software" entries, there are two notebook computers with energy-saving elements relating to Sony VGP-BPS8A battery Sony VGP-BPS9 battery: "Managing energy consumption" and "use of portable machine" in the "management laptop on the power." Energy-saving settings during Windows, should read the contents.

(D) alarm settings] hua

Set Dell laptop battery alarm in time to give prompt the user to save the information. Way is to click on Open "Control Panel", double-click "Power" option of VGP-BPS8, point "alarm" menu bar, "low-battery alarm" column, Windows 98 default is 10%, "a serious shortage of the battery alarm" column, Windows 98 default is 3% can make the appropriate modifications as needed. Click both the [alarm response] button, the "voice alert" and "displays the message" are selected, "the power level" may from time to select via Inspiron 510m Battery. Alarm limits so that when the battery is used, it will pop up a warning window, and the alarm buzzer sounds to alert the user to save information on a timely manner. Finally click [OK] button to exit the power management settings.

(E) open the energy-saving function

In the "extended laptop battery life technology" section, we have introduced energy-saving feature is the use of a CPU technology, which allows the performance make notebook PCs to play with their battery life between the time to achieve the best balance of VGP-BPS5. Most new models of notebook computers both in the BIOS of the CPU energy-saving technology have given the support to Sony VGP-BPS9, by default is turned on, if not open as long as the enter the BIOS will support the option to open it OK.

 the article is via :

Battery Mark test principle is to use the built-in four engines to simulate the actual operating conditions to consume battery power. This four engines are the Graphics engine, Processorengine, Diskengine and Thinkengine. ".Graphics engine built-in Battery Mark by calling the procedure a sample LCBTP03003, such as Photoshop, Dreamweaver, etc. to simulate the actual use to deal with graphics, web pages and documentation process.

Processorengine to CPU occupancy rate increased to 100% instantly and maintain a period of time to simulate the CPU high load power consumption of under working conditions.Disk engine through repeated read and write operations on the hard disk to simulate the actual use of the power consumption of these drives on VGP-BPS8 VGP-BPS9, when you can see the hard disk light flash in the mad.Thinkengine is a simulation of the actual situation of users in the process of thinking.

Test, Battery Mark will be in the 4 cycle engine, constantly switching between Pavilion dv2000 Battery Pavilion dv6000 Battery HSTNN-LB31, followed by testing a variety of operating environment, this four engines can be fully integrated with the specific circumstances of the test battery. Each had 2 to 3 minutes Battery Mark test data will be automatically saved to the user to set the directory below. Completely exhausted the battery, the computer automatically shut down the last time before the results will be saved as the final test results. 4, repair laptop computer batteries methods

(a) causes damage to the battery,

notebook computer battery life is longer, often dissatisfied with battery charge, and even show the battery has been damaged, concrete expression of the resistance is bigger, at charging voltage is increasing relatively quickly at both ends. So easy to charge control circuit has been judged already been filled powerbook G4 ac charger powerbook g4 power charger, the capacity also falls. Since relatively large battery internal resistance, discharge voltage drop big, fast, so the system is easy to mistakenly believe that voltage is not enough electricity shortage. The discovery of relatively short battery life, should take appropriate measures.

(B) The battery refresh program to restore the battery discharge time

Big-brand notebooks have a battery refresh program, we can use it to repair the battery. For example: a IBMThinkpad390/262650-based notebook computers, are fitted with nickel-metal hydride batteries (Ni-Mh) batteries, due to normal charge and discharge properly, leading to the Pavilion dv2000 Battery and Pavilion dv6000 Battery discharge time is shorter, leaving less than 5 minutes, if the bring notebook computers to work, then it is very inconvenient, what methods can restore the battery discharge time then?

In response to these circumstances, we can use the IBM has launched a battery refresh program to refresh the battery put it back in discharge time, specifically as ibook g4 charger APple A1021 charge.

(1) the use of AC power to the notebook computer, first to ftp://fip. pc. ibm. com / pub / pccbbs / mobiles / isbr01ww. exe download software provided by IBM notebook computer batteries TP390/390e/390x refresh program. Wsvk

Ray (2), restart your computer, press F8 key to enter boot menu and select safe DOS mode.

Ray Pride (3) into the directory where the file you just downloaded to Compaq laptop battery, the implementation of the battery refresh program isbr0lww, exe, reading a warning message, by asking you to insert a floppy disk, and then press the Enter key to the implementation of the self-extracting operation.

Ray Pride (4) boot floppy disk with this computer, the screen appears StartingPC-DOS. . . Tips.

Ray (5) Follow the prompts to unplug the AC power to Apple, the program will automatically pairs of Ni-Mh battery discharge, discharge is completed, the system will automatically shut down.

(6) due to the battery temperature is higher at this time should not start immediately Sony VGP-BPS9, so that the battery cool for a while, the plug in AC power.

(7) to guide the computer with the floppy disk, this Autoexec. bat file will run automatically refresh program, and asks the user whether to proceed. Select yes, press the Enter key.

(8) At this point into HP , refresh program began to refresh the battery, the process quickly, when the return to DOS prompt A:> when that refresh has been completed.

(9) Turn off the computer, and recharge the battery until the green indicator light up.

Ray Pride (10) The above procedure repeated three times to get the best results.

Also, many battery pack lithium battery failure is the failure of a power-saving result of the core, this phenomenon can not be avoided. Because each section of the battery core properties can not be fully consistent with some of the quality of somewhat less long after the beginning of aging and the undermining of the whole (series after) the discharge curve to Acer BTP-58A1 Acer LCBTP03003. Interest and ability readers can try to open the battery pack, in the multimeter's help, you can quickly find the damaged batteries (abnormal voltage). If conditions permit, according to the corresponding parameters of the replacement batteries can be qualified product.

the article is via : discount-laptop-battery batterychat  batterydaily  batterywatch  laptopchat

1,laptop batteries Category:

Media can be divided in accordance with nickel-cadmium battery NI-CD, Ni-MH NI-MH, Lithium-Ion battery LI, lithium-ion LI-ION and the latest lithium-ion polymer battery, and now the most frequently used is the notebook lithium-ion batteries unlike to 319411-001.

2, the structure and capacity of laptop battery calculated as follows:

No matter what kind of notebook batteries by batteries + charging protection circuit, the charging protection circuit is again the control chip to prevent over-charging the battery overheating and to prevent overheating protector formed. General laptop batteries are 10.8v, 11.1v or 14.4v's. How to distinguish between the quantity of batteries inside it? Keep in mind that each lithium-ion battery voltage is 3.6v to 3.7v, so to get more than three kinds of voltage, you must first series AS Sony PCGA-BP2NX sony VGP-BPS8 VGP-BPS9 three or four batteries, and then from n group the composition of such batteries in series battery packs . For example, your battery nominal 10.8v/3600ma, it may be 6-cell or 9-pin, single-core power-saving capacity of 1800ma or 1200ma

3, lithium-ion battery charge and discharge limits:

Why laptop battery protection circuit should be built-in charging? This is because the lithium-ion batteries have a certain charge voltage limit, the general 3.6v rechargeable battery should not exceed 4.2v, otherwise it could explode. This requires an external device monitoring charging voltage VGP-BPS9A/B Sony VGP-BPS3 319411-001 Pavilion dv2000 Battery, in approaching the threshold when to stop charging the same, batteries have discharge limits, the general 3.6v battery can not discharge more than 2.75v, which would otherwise cause the battery failure, which is what we often say "over-discharge."

4, lithium-ion batteries Model:

Lithium-ion battery signal is provided in accordance with its exterior dimensions, usually used in laptop batteries have the following models: 18650,18500,17670,17650,103448,103450, to 18650, for example, the batteries in diameter 18mm, length 65mm therefore become 18,650.103448 and 103450 belong to the battery box, IBM 240 series on the use of this type of electric battery, wide tall respectively, 10mm, 34mm, 48mm. In general Laptop batteries are used 18650 or 17670 batteries such as Pavilion dv6000 Battery HSTNN-LB31 Toshiba PA3399U-1BRS, mainly because the two larger capacity batteries, are smaller and are likely to cause the battery needed shape.

5, what is the change batteries?

Change batteries in the battery pack is to the original batteries out, replace the other batteries. Changing batteries battery manufacturers are strictly prohibited acts, because it has a very high risk. Changing batteries when the battery itself, with a voltage soldering iron or other tool to easily generate electrostatic discharge lead to short-circuit to Acer Aspire 3000 battery BTP-58A1 Acer LCBTP03003 dell inspiron 1721 battery, causing fire explosion. On the other hand, due to charging protection circuit has been written into the original batteries information (capacity, discharge curve, etc.), changing batteries is likely to result in failure protection circuit, which can not be charged, or even lead to overcharging explosion. So, for batteries is dangerous, and there is a risk, it must pay attention! !

6, changing batteries need to pay attention to?

Changing batteries is dangerous, but to save money, so we have to take the risk. Change batteries before the battery should shine some attention (usually around 5% can be placed). This is because the new batteries with only a little more than their own power, if you put a fully charged Latitude D600 Battery Latitude D610 Battery Dell Latitude D620 Battery Naqu for batteries, charging protection circuit will always remember with your battery is full charge, even with no electricity for the new batteries, circuit is also not allowed to recharge, and many of the core after changing the battery does not charge for that reason.

In addition, changing batteries, carefully check the batteries prior to the model, capacity, brand, sometimes different brands of batteries into the charging circuit, the circuit will automatically lock (small Japanese developed technology), resulting in failure for the core. So it'll replace the same kinds of brands of batteries. Also, changing batteries must be completely replaced, must not only for part of the batteries, it is very dangerous, they must gain petty advantages face a significant loss to Dell Inspiron 710m Battery Dell Latitude D800 Battery Dell Inspiron 510m Battery. Also, do not the blind pursuit of high-capacity batteries, because some of the circuit for the detection of the new capacity is more than the original batteries when the batteries will be locked, or only allowed to charge to the original capacity, so for the success of large-capacity batteries rate is very low.

7, changing batteries need to pay attention after what?

After changing batteries should note that the first three charge-discharge must be at least full release, that is filled with charge after a period of time, and then began to use; discharge should be placed below 5% and then start charging. This is because the new batteries and between the original circuit will take some adjustments, to achieve accurate measurement of power level. Some of the new-for-cell battery in use to 30% of the time immediately power down to 0, which is a very common VGP-BPS9/B Sony VGP-BPS5  Sony VGP-BPS2  VGP-BPS9/S Dell Inspiron 1721 Battery, indicating the circuit is not yet complete self-calibration (calibration), measurements are not accurate. Usually after two or three times to achieve the best possible state).

8, looking from another battery batteries can pulls core?

Looking from another time the battery batteries generally were able to once again change the core Sony VGP-BPS2  VGP-BPS9/S, as long as the circuit is no problem. However, after repeatedly changing the circuit core solder-intensive, is not easy to once again on the tin, and may have missed welding, cold solder joint case, so in general, do not change the core of another.

9, changing batteries will bring things:

Notebook computers are certain to bring, and the other to wear a battery monitor or battery mark of the type of software, changing the amount of exhausted immediate tests of full charge and charge-discharge curves. General business will give you some time warranty to Dell Inspiron 1721 Battery Sony VGP-BPL8, so as long as the charge about 15% of the spot to test the line, and get it back to the devil and then tested.
the article is via :  discount-laptop-battery batterychat  batterydaily  batterywatch  laptopchat

laptop computers equipped with original equipment batteries, after a period of time after use, there will inevitably be of standby time. Some users said: "The depth with repeated charge and discharge method, you can restore the performance of the battery, thereby extending battery life with a APple A1021 adapter." Comparison of this argument one-sided.

To understand this issue correctly, may start with the battery type used in laptop computers start with Acer Aspire 3000 battery. As you know, before 1995 the production of notebook computers are basically nickel-cadmium batteries to power. The battery is in use, if the charge-discharge method is not correct, the battery will have a "memory effect", thereby reducing the battery's actual capacity to eliminate this "memory effect" is used repeatedly in the best way to charge and discharge depth way. With the emergence of nickel-metal hydride batteries, battery capacity has significantly improved, but the "memory effect" did not completely eliminate the shortcomings.

In recent years, lithium-ion batteries in notebook computers has been rapidly growing popularity, due to lithium-ion batteries have basically eliminated the "memory effect" problem, it is used repeatedly to restore the battery depth of charge and discharge performance of the method no longer applies to powerbook g4 adapter. However, lithium-ion batteries why I still appear to reduce the capacity of the problem? The root causes of that situation, is used in notebook computers and the original lithium-ion battery built-in battery management system in the making.

Battery Management: At present, in notebook computers or Dell Latitude D800 Battery, almost all adopted the "battery management" and "charge-discharge control" two kinds of chip-level management system. The "battery management chip" placed in a notebook inside the chip to store the register of the computer used in the capacity of lithium-ion batteries, working temperature, ID, serial number, charge and discharge status, charging and discharging the accumulated frequency of important information. The data information in the use of the process to Dell Latitude D620 Battery, according to the actual situation of continuously updated. The battery built-in "charge-discharge control chip," the most important role is to monitor and control the battery charge-discharge process as a whole and be documented.

the article is via :

1. http://electrinic.over-blog.com/
2. http://battery-online-shop.over-blog.com/
3. http://batterynews.blogdetik.com/
4. http://batteryknowledges.blog.com/
5. http://ecsem1.typepad.com/blog/
6. http://sites.google.com/site/coolbatterysites/
7. http://batterynews.slinkset.com/

   1. http://d.hatena.ne.jp/mynest/